Repair Parts -- new and used -- moderated newsgroup for trading > Meta Discussion
> Millermatic 212 mig welder with 3035 spoolgun 951068
Millermatic 212 mig welder with 3035 spoolgun 951068
For Sale: Millermatic 212 mig welder with 3035 spoolgun 951068
Subject Millermatic 212 mig welder with 3035 spoolgun 951068
Ad is submitted by poster:
MILLERMATIC 212 MIG WELDER WITH 3035 SPOOLGUN 951068
* A step up in all-in-one MIG welding power and performance
* Seven taps provide wider welding range of 30-210 A with superior performance throughout its operating range
* 208/230 VAC, 160 A at 60% duty cycle
* Spool gun ready ??? welds aluminum from 14 gauge to 3/8 inch
* Highly reliable and economical spool gun with excellent feeding to weld aluminum
* Light industrial spool gun rated at 150 A at 60% duty cycle
* 20 ft weld/control cables provide reach and accessibility to your work
. Everything you need to weld, just add cylinder gas, and wire, which are listed in another listing. .
Comes with full 3 year factory warranty.
CLICK HERE FOR full spec sheets http:// /pdf/spec_sheets/DC12-46.pdf
You can call US at (***)-854-7380 FROM 5:00AM-7:00PM PT, 7 DAYS A WEEK.
Rethink Your Definition of FULLY LOADED
EZ-View Control Panel EZ-Access Consumable Compartment & Parameter Chart Dual Front Handles EZ-Change Low Cylinder Rack Angled Wire Drive Elevated Gun & Cable Rack
* Vocational/Technical Schools
* 160 Amps at 24.5 VDC, 60% duty cycle
* 50 - 700 IPM (1.3 - 17.8 m/min)
* 10 ft (3 m) power cord and plug
* New! 15 ft (4.6m), 250 amp M-25 MIG gun for .030/.035 in wire
* 10 ft (3 m) work cable and clamp
* Factory-installed dual gas solenoids
* Argon mix regulator/flow gauge w/hose
* New! Factory-installed running gear with EZ-Change Low Cylinder Rack
* .030/.035 in reversible drive rolls
* New! Set-up and operation interactive CD
Seven taps provide wider welding range of 30-210 amps with improved high and low ends to weld materials from 22 gauge up to 3/8 in (9.5 mm) thick in a single pass.
New! Angled, dual-gear-driven, cast aluminum drive system features no-tool, quick-change reversible drive rolls and easy-to-set, scaled tension knob.
New! Patent-pending EZ-Change Low Cylinder Rack allows operators to easily roll cylinders on and off of rack - no need to lift cylinders.
INCLUDES the optional Spoolmate 3035 spool gun for aluminum welding. Easy to install with direct hook up. And with Miller's exclusive Gun-On-Demand,simply pull the trigger for either gun and you're ready to weld. No wasted time installing modules and using toggle switches.
New! Thermal Overload Protection
shuts down unit and activates over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when fault is corrected and unit cools.
New! EZ-Access Consumable Compartment and Parameter Chart - convenient new flidown compartment that provides fast access to parameter chart and consumables.
New! Larger work area - now with longer 15-ft M-25 gun.
Less weld cleanup with Active Arc Stabilizer - patented Miller design provides excellent starts proven superior to the competition.
- Money Orders/Cashier's Checks
More than just a pretty picture.
Increase sales, maximize profits
FREE scheduling, supersized images and templates.
repair--parts.com bears NO responsibility for this ad. Please report ads that do not follow our
rules (on front page).
Posted By: Phoebe Sheppard
Contact: email@example.com (Phoebe Sheppard) (this is a temporary forwarding address).